Exclusive distributor in AU
XADO 1 Stage MAGNUM
Availability: In Stock
Product contains Revitalizant

XADO 1 Stage MAGNUM

Gel-revitalizant for heavy-loaded diesel engines of trucks. It is designed for restoring repair of an engine and active protection directly during its operation.

Innovative next-generation product which combines advantages of the 3rd generation Revitalizant: one-step application, high treatment speed, increase of protecting properties.

Choose product to view its image on the left
XADO 1 Stage MAGNUM
Pack: Price:
$199.00
Prices without delivery

Application

Squeeze out the content of the tube into the oil filler neck of the engine warmed up to the operating temperature. Start the engine and let it idle 3-5 minutes. Further operation of the vehicle is to be carried out in the normal mode.

Dosage

One tube of 1 Stage MAGNUM gel-revitalizant (90 ml) is enough for the engine with the volume of oil system up to 8-11 gallons.

Note

The compound is compatible with all types of engine oils.
It takes about 600 miles to complete the treatment cycle. During this time oil change is not recommended.
Repeated application is recommended after 62 000 miles of run.
To provide the highest level of protection against wear it is recommended to use further XADO Atomic Oil.

Additional marking

RF=100
RF (Revitalization factor) — (Revitalization factor) is an index of efficiency and protection of engine’s wear.
RF=100 means that the product contains enough Revitalizant for the maximal possible restoring and repairing properties. As a result of treatment the transmission assembly will undergo the full cycle of revitalization, it will be totally restored and reliably protected against wear for 62 000 ml .

Package

Tube 90 ml

  • Restoration and protection against wear of friction surfaces in cylinder-piston group, crank-and-rod and gas-distributing mechanisms;
  • Creating of effective protective system for engine’s parts against wear and overloads at all operational modes;
  • Leveling and increasing of compression in cylinders;
  • Protection of an engine against consequences of cold start;
  • Considerable decreasing of fuel consumption;
  • Elimination of emissions into the atmosphere;
  • Increasing of an engine power, improving its acceleration response time;
  • Noise and vibration reduction;
  • Expansion of car assemblies’ lifespan by 2-3 times.
  Bad            Good
captcha ->